Material: HDPE (Plastic) Colors: Black Capacity: 500 ml Weight: 37.5 g Height: 210 mm Diameter: 61 mm
Description
High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylene thermoplastic made from petroleum. With a high strength-to-density ratio, HDPE is used in the production of plastic bottles, corrosion-resistant piping, geomembranes, and plastic lumber.
HDPE is widely used in extrusion‐blow‐mold containers for household chemicals, automotive products and large drums of industrial chemicals. It has a higher abrasion and chemical resistance resists strong acids and alkalis.
HDPE is an excellent moisture barrier and is well‐suited for packaging household cleaners. Good rigidity and stiffness make HDPE bottles the resin of choice for many household cleaners.
These plastic specialty bottles are an ideal way to display any product and are available in a wide variety of shapes and sizes to suit any need.
These Spray Bottles are available in various sizes and specifications, OEM and ODM are welcome. Due to differences in monitors, colors of products may also appear different from those shown on the site.
Material: PP, PE, SUS316, Rubber Colors: Red Nozzle Cap, Black Body Output per Stroke: 1.1 cc ± 0.1 cc Function: Adjustable Plastic Nozzle Closure Size: 28/400 mm Weight: 26.8 g ± 0.2 g ◉ M.O.Q: 5,000 Pieces.
Features: – O-ring: NBR Rubber (changeable) – Piston Washer: NBR Rubber (changeable) – Spring: 316 Stainless Steel – Steel Ball: 316 Stainless Steel – Locking: The nozzle right twist to the end – Dip Tube Max Length: 290 mm (with filter)
This chemically resistant trigger sprayer works well for most tough chemicals that would typically harm a standard trigger sprayer. The nozzle is adjustable to create a fine spray or jet stream for dispensing liquids. In addition to harsh chemicals, this trigger sprayer is good for general use, household cleaners, auto detail, carpet spot cleaning, and more.
Material: Polypropylene (PP) is a tough plastic that has good chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. It is not recommended for cold or sub-freezing temperatures.
316 stainless steel – This product offers high tensile strength and has a corrosion resistance that can withstand harsh environments. It is also non-magnetic and must be hardened through cold working. The difference between type 304 and 316 stainless steel is the incorporation of molybdenum of up to 3%.
Rubber Property:
NBR (Nitrile Rubber) Property Comparison Oil and Fuel Resistance: A Animal & Vegetable Oil Resistance: A+ Alcohol Resistance: A Alkaline Resistance: A Acid Resistance: A Aliphatic-solvent Resistance : Aliphatic: A+ Aliphatic-solvent Resistance : Aromatic: B Oxygen Ated-solvent Resistance: D Water Resistance: A
Disadvantages: Not suitable for use in polar solvents such as ketones, ozone, nitro hydrocarbons, MEK, and chloroform.
At present, our sprayers are available in two types of rubber for chemical products. The two types of rubbers are NBR and Viton. NBR is the most popular rubber material in our triggers, and the price is acceptable, not expensive, but some of the solvents will be damage the NBR. Next, the Viton (FKM) will be very expensive than other rubber, especially strong resistance for Acid, Alkali, oil, and Gasoline chemicals.
Simply put, our chemical resistance sprayers are divided into two grades, one is NBR, and the performance and price are the best. The other kind of Viton is applicable to a wider range of chemicals if you have no cost considerations and also has a long service life.
EVO Black Golden Chemical Resistant Trigger Sprayer
Item No.: CFT030
Material: PP, PE, SUS316, Rubber Colors: Black Nozzle Cap, Golden Body Output per Stroke: 1.1 cc ± 0.1 cc Function: Adjustable Plastic Nozzle Closure Size: 28/400 mm Weight: 26.8 g ± 0.2 g
Description:
Features: – O-ring: NBR Rubber (changeable) – Piston Washer: NBR Rubber (changeable) – Spring: 316 Stainless Steel – Steel Ball: 316 Stainless Steel – Locking: The nozzle right twist to the end – Dip Tube Max Length: 270 mm (with filter)
This chemically resistant trigger sprayer works well for most tough chemicals that would typically harm a standard trigger sprayer. The nozzle is adjustable to create a fine spray or jet stream for dispensing liquids. In addition to harsh chemicals, this trigger sprayer is good for general use, household cleaners, auto detail, carpet spot cleaning, and more.
Material: Polypropylene (PP) is a tough plastic that has good chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. It is not recommended for cold or sub-freezing temperatures.
316 stainless steel – This product offers high tensile strength and has a corrosion resistance that can withstand harsh environments. It is also non-magnetic and must be hardened through cold working.
Rubber Property
NBR (Nitrile Rubber) Property Comparison Oil and Fuel Resistance: A Animal & Vegetable Oil Resistance: A+ Alcohol Resistance: A Alkaline Resistance: A Acid Resistance: A Aliphatic-solvent Resistance : Aliphatic: A+ Aliphatic-solvent Resistance : Aromatic: B Oxygen Ated-solvent Resistance: D Water Resistance: A
Disadvantages: Not suitable for use in polar solvents such as ketones, ozone, nitro hydrocarbons, MEK, and chloroform.
At present, our sprayers are available in two types of rubber for chemical products. The two types of rubbers are NBR and Viton. NBR is the most popular rubber material in our triggers, and the price is acceptable, not expensive, but some of the solvents will be damage the NBR. Next, the Viton (FKM) will be very expensive than other rubber, especially strong resistance for Acid, Alkali, oil, and Gasoline chemicals.
Simply put, our chemical resistance sprayers are divided into two grades, one is NBR, and the performance and price are the best. The other kind of Viton is applicable to a wider range of chemicals if you have no cost considerations and also has a long service life.
Green White Chemical Resistant Trigger Sprayer With Copper Nozzle
Item No.: CFT029
Material: PP (Plastic) Colors: Green Nozzle Cap, White Body Output per Stoke: 1.1 cc ± 0.1 cc Function: Adjustable Copper Nozzle Closure Size: 28/400 mm Weight: 26.8 g ◉ M.O.Q: 3,000 Pieces.
Features: – Locking: The nozzle right twist to the end – Dip Tube Max Length: 290mm – Piston Washer: NBR Rubber (changeable) – Spring: 316 Stainless Steel – Steel Ball: 316 Stainless Steel
This chemically resistant trigger sprayer works well for most tough chemicals that would typically harm a standard trigger sprayer. The nozzle is adjustable to create a fine spray or jet stream for dispensing liquids. In addition to harsh chemicals, this trigger sprayer is good for general use, household cleaners, auto detail, carpet spot cleaning and more.
Material: Polypropylene (PP) is a tough plastic that has good chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. It is not recommended for cold or sub-freezing temperatures.
316 stainless steel – This product offers high tensile strength and has a corrosion resistance that can withstand harsh environments. It is also non-magnetic and must be hardened through cold working. The difference between type 304 and 316 stainless steel is the incorporation of molybdenum of up to 3%.
Please Note: This product image is made by computer simulation software for reference only.
Rubber Property
NBR (Nitrile Rubber) Property Comparison Oil and Fuel Resistance: A Animal & Vegetable Oil Resistance: A+ Alcohol Resistance: A Alkaline Resistance: A Acid Resistance: A Aliphatic-solvent Resistance : Aliphatic: A+ Aliphatic-solvent Resistance : Aromatic: B Oxygen Ated-solvent Resistance: D Water Resistance: A
Disadvantages: Not suitable for use in polar solvents such as ketones, ozone, nitro hydrocarbons, MEK, and chloroform.
At present, our sprayers are available in two types of rubber for chemical products. The two types of rubbers are NBR and Viton. NBR is the most popular rubber material in our triggers, and the price is acceptable, not expensive, but some of the solvents will be damage the NBR. Next, the Viton (FKM) will be very expensive than other rubber, especially strong resistance for Acid, Alkali, oil, and Gasoline chemicals.
Simply put, our chemical resistance sprayers are divided into two grades, one is NBR, and the performance and price are the best. The other kind of Viton is applicable to a wider range of chemicals if you have no cost considerations and also has a long service life.
Fine Black HDPE Plastic Trigger Spray Bottle 940ml
Item No.: CFS096
Material: PP / HDPE (Plastic) Trigger Sprayer Colors: Black Function: Adjustable Nozzle Bottle Color: Black Capacity: 940 ml (25.36 oz) Closure Size: 28/410 mm Weight: 80 g
Description
Material: PP – Plastic Polypropylene is a tough plastic with good chemical resistance. PP is translucent naturally but can have a glossy finish when produced with color. It is not recommended for cold or sub-freezing temperatures.
High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylene thermoplastic made from petroleum. With a high strength-to-density ratio, HDPE is used in producing plastic bottles, corrosion-resistant piping, geomembranes, and plastic lumber.
Additional: These Spray Bottles are available in various sizes and specifications, please feel free to contact us, also OEM and ODM are welcome.
Translucent Black PET Spray Bottle 250ml with Black Trigger
Item No.: CFS095
Material: PP / PET (Plastic) Trigger Sprayer Colors: Black Bottle Color: Translucent Black Capacity: 250 ml. Closure Size: 24/410 mm. Weight: 42 g. Height: 220 mm. Diameter: 50 mm. ◉ M.O.Q: 3,000 Pieces.
Description
A plastic bottle is a bottle constructed from plastic. Plastic bottles are typically used to store liquids such as water, soft drinks, motor oil, cooking oil, medicine, shampoo, milk, and ink. These plastic specialty bottles are an ideal way to display any product and are available in a wide variety of shapes and sizes to suit any need. Our plastic bottles are made from HDPE, LDPE, PET or PVC.
Material: PET – Polyethylene terephthalate (sometimes written poly), commonly abbreviated PET, PETE, or the obsolete PETP or PET-P, is the most common thermoplastic polymer resin of the polyester family and is used in fibers for clothing, containers for liquids and foods, thermoforming for manufacturing, and in combination with glass fiber for engineering resins.
Additional: Due to differences in monitors, colors of products may also appear different from those shown on the site. These Spray Bottles are available in various sizes and specifications, OEM and ODM are welcome.
Material: PET (Plastic)
Colors: Transparent Black
Capacity: 250 ml
Screw Closure Size: 24/410 mm
Weight: 25 g
Height: 154 mm
Diameter: 51.5 mm
◉ M.O.Q: 3,000 Pieces.
Description
These plastic specialty bottles are an ideal way to display any product and are available in a wide variety of shapes and sizes to suit any need.
Material: PET
Polyethylene terephthalate (sometimes written poly(ethylene terephthalate)), commonly abbreviated PET, PETE, or the obsolete PETP or PET-P, is the most common thermoplastic polymer resin of the polyester family and is used in fibers for clothing, containers for liquids and foods, thermoforming for manufacturing, and in combination with glass fiber for engineering resins.
Additional
Due to differences in monitors, colors of products may also appear different from those shown on the site. These Spray Bottles are available in various sizes and specifications, OEM and ODM are welcome.
Material: PP (Plastic).
Colors: White Blue
Output per Stoke: 2.0 cc ± 0.1 cc.
Function: Spray, Steam, Off.
Closure Size: 28/400 mm.
Weight: 35 g
Dip Tube Max Length: 290mm. ※ Property: Chemical Resistant.
◉ M.O.Q: 3,000 Pieces.
Description
This chemically resistant trigger sprayer works well for most tough chemicals that would typically harm a standard trigger sprayer. The nozzle is adjustable to create a fine spray or jet stream for dispensing liquids. In addition to harsh chemicals, this trigger sprayer is good for general use, household cleaners, auto detail, carpet spot cleaning and more.
Material: Polypropylene
Plastic Polypropylene (PP) is a tough plastic that has a good chemical resistant. PP is translucent in its natural state but can have a glossy finish when produced with color. It is not recommended for cold or sub-freezing temperatures.
Additional:
Due to differences in monitors, colors of products may also appear different to those shown on the site. These Spray Bottles are available in various sizes and specifications, OEM and ODM are welcome.
Cap Size：28/400 (6TPI/8TPI), 28/410TR(6TPI/8TPI), 28/410(6TPI), 28W
Outflow per stroke：1.1cc±0.1cc
Function: Spray & Stream & Off
Package for domestic(export)：500pcs/ctn 52*37*45cm
Description
Our trigger sprayers are available in a variety of colors, which can be used to identify different products in the bottles. The nozzle can be adjusted to create a fine spray or jet stream for dispensing liquids. And the professional trigger sprayers can be used for general use, such as water, cleaning solutions or chemicals, it is mostly used in the cleaning professions.
Spray Head Material: PE (Plastic).
Bottle Material: PP (Plastic).
Sprayer Color: Black / Red.
Capacity: 1000 ml.
System: Manual Operation.
Power Source: Pressure.
Weight: 400 g.
Description
Easy to use, handy and light they have a regulating nozzle which permits to obtain a fine vaporization or a jet spray of about 7 meters. They are very useful in the house for cleaning, for humidifying, in gardens, in terraces, and in homes for plant maintenance, in garages for cars. Furthermore, they are very valid for pro. Professional uses on the workshops, machine maintenance, etc…
Instructions for use
Tighten clockwise the ‘Upper Cap’ firmly after having filled the container with water or solution.
Pump piston up and down (about 15~20 strokes) with trigger Lever closed.
Adjust the nozzle cap clockwise for jet spray and counterclockwise for fine spray.
Please Note: Due to differences in monitors, colors of products may also appear different to those shown on the site.
Spray Head Material: PE (Plastic).
Bottle Material: PP (Plastic).
Sprayer Color: Black / Red.
Capacity: 1000 ml.
System: Manual Operation.
Power Source: Pressure.
Weight: 400 g.
Description
Instructions for use
Tighten clockwise the ‘Upper Cap’ firmly after having filled the container with water or solution.
Pump piston up and down (about 15~20 strokes) with trigger Lever closed.
Adjust the nozzle cap clockwise for jet spray and counterclockwise for fine spray.
Please Note: Due to differences in monitors, colors of products may also appear different to those shown on the site.
CF Sprayer 