Red Black Chemical Resistant Trigger Sprayer

Red Black Chemical Resistant Trigger Sprayer

Item No.: CFT031

Material: PP, PE, SUS316, Rubber
Colors: Red Nozzle Cap, Black Body
Output per Stroke: 1.1 cc ± 0.1 cc
Function: Adjustable Plastic Nozzle
Closure Size: 28/400 mm
Weight: 26.8 g ± 0.2 g
◉ M.O.Q: 5,000 Pieces.

Features:
– O-ring: NBR Rubber (changeable)
– Piston Washer: NBR Rubber (changeable)
– Spring: 316 Stainless Steel
– Steel Ball: 316 Stainless Steel
– Locking: The nozzle right twist to the end
– Dip Tube Max Length: 290 mm (with filter)

This chemically resistant trigger sprayer works well for most tough chemicals that would typically harm a standard trigger sprayer. The nozzle is adjustable to create a fine spray or jet stream for dispensing liquids. In addition to harsh chemicals, this trigger sprayer is good for general use, household cleaners, auto detail, carpet spot cleaning, and more.

Material: Polypropylene (PP) is a tough plastic that has good chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. It is not recommended for cold or sub-freezing temperatures.

316 stainless steel – This product offers high tensile strength and has a corrosion resistance that can withstand harsh environments. It is also non-magnetic and must be hardened through cold working. The difference between type 304 and 316 stainless steel is the incorporation of molybdenum of up to 3%.

Rubber Property:

NBR (Nitrile Rubber) Property Comparison
Oil and Fuel Resistance: A
Animal & Vegetable Oil Resistance: A+
Alcohol Resistance: A
Alkaline Resistance: A
Acid Resistance: A
Aliphatic-solvent Resistance : Aliphatic: A+
Aliphatic-solvent Resistance : Aromatic: B
Oxygen Ated-solvent Resistance: D
Water Resistance: A

Disadvantages: Not suitable for use in polar solvents such as ketones, ozone, nitro hydrocarbons, MEK, and chloroform.

At present, our sprayers are available in two types of rubber for chemical products. The two types of rubbers are NBR and Viton. NBR is the most popular rubber material in our triggers, and the price is acceptable, not expensive, but some of the solvents will be damage the NBR. Next, the Viton (FKM) will be very expensive than other rubber, especially strong resistance for Acid, Alkali, oil, and Gasoline chemicals.

Simply put, our chemical resistance sprayers are divided into two grades, one is NBR, and the performance and price are the best. The other kind of Viton is applicable to a wider range of chemicals if you have no cost considerations and also has a long service life.

EVO Black Golden Chemical Resistant Trigger Sprayer

EVO Black Golden Chemical Resistant Trigger Sprayer

Item No.: CFT030

Material: PP, PE, SUS316, Rubber
Colors: Black Nozzle Cap, Golden Body
Output per Stroke: 1.1 cc ± 0.1 cc
Function: Adjustable Plastic Nozzle
Closure Size: 28/400 mm
Weight: 26.8 g ± 0.2 g

Description:

Features:
– O-ring: NBR Rubber (changeable)
– Piston Washer: NBR Rubber (changeable)
– Spring: 316 Stainless Steel
– Steel Ball: 316 Stainless Steel
– Locking: The nozzle right twist to the end
– Dip Tube Max Length: 270 mm (with filter)

This chemically resistant trigger sprayer works well for most tough chemicals that would typically harm a standard trigger sprayer. The nozzle is adjustable to create a fine spray or jet stream for dispensing liquids. In addition to harsh chemicals, this trigger sprayer is good for general use, household cleaners, auto detail, carpet spot cleaning, and more.

Material: Polypropylene (PP) is a tough plastic that has good chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. It is not recommended for cold or sub-freezing temperatures.

316 stainless steel – This product offers high tensile strength and has a corrosion resistance that can withstand harsh environments. It is also non-magnetic and must be hardened through cold working. 

Rubber Property

NBR (Nitrile Rubber) Property Comparison
Oil and Fuel Resistance: A
Animal & Vegetable Oil Resistance: A+
Alcohol Resistance: A
Alkaline Resistance: A
Acid Resistance: A
Aliphatic-solvent Resistance : Aliphatic: A+
Aliphatic-solvent Resistance : Aromatic: B
Oxygen Ated-solvent Resistance: D
Water Resistance: A

Disadvantages: Not suitable for use in polar solvents such as ketones, ozone, nitro hydrocarbons, MEK, and chloroform.

At present, our sprayers are available in two types of rubber for chemical products. The two types of rubbers are NBR and Viton. NBR is the most popular rubber material in our triggers, and the price is acceptable, not expensive, but some of the solvents will be damage the NBR. Next, the Viton (FKM) will be very expensive than other rubber, especially strong resistance for Acid, Alkali, oil, and Gasoline chemicals.

Simply put, our chemical resistance sprayers are divided into two grades, one is NBR, and the performance and price are the best. The other kind of Viton is applicable to a wider range of chemicals if you have no cost considerations and also has a long service life.

Green White Chemical Resistant Trigger Sprayer With Copper Nozzle

Green White Chemical Resistant Trigger Sprayer With Copper Nozzle

Item No.: CFT029

Material: PP (Plastic)
Colors: Green Nozzle Cap, White Body
Output per Stoke: 1.1 cc ± 0.1 cc
Function: Adjustable Copper Nozzle
Closure Size: 28/400 mm
Weight: 26.8 g
◉ M.O.Q: 3,000 Pieces.

Features:
– Locking: The nozzle right twist to the end
– Dip Tube Max Length: 290mm
– Piston Washer: NBR Rubber (changeable)
– Spring: 316 Stainless Steel
– Steel Ball: 316 Stainless Steel

This chemically resistant trigger sprayer works well for most tough chemicals that would typically harm a standard trigger sprayer. The nozzle is adjustable to create a fine spray or jet stream for dispensing liquids. In addition to harsh chemicals, this trigger sprayer is good for general use, household cleaners, auto detail, carpet spot cleaning and more.

Material: Polypropylene (PP) is a tough plastic that has good chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. It is not recommended for cold or sub-freezing temperatures.

316 stainless steel – This product offers high tensile strength and has a corrosion resistance that can withstand harsh environments. It is also non-magnetic and must be hardened through cold working. The difference between type 304 and 316 stainless steel is the incorporation of molybdenum of up to 3%.

Please Note: This product image is made by computer simulation software for reference only.

Rubber Property

NBR (Nitrile Rubber) Property Comparison
Oil and Fuel Resistance: A
Animal & Vegetable Oil Resistance: A+
Alcohol Resistance: A
Alkaline Resistance: A
Acid Resistance: A
Aliphatic-solvent Resistance : Aliphatic: A+
Aliphatic-solvent Resistance : Aromatic: B
Oxygen Ated-solvent Resistance: D
Water Resistance: A

Disadvantages: Not suitable for use in polar solvents such as ketones, ozone, nitro hydrocarbons, MEK, and chloroform.

At present, our sprayers are available in two types of rubber for chemical products. The two types of rubbers are NBR and Viton. NBR is the most popular rubber material in our triggers, and the price is acceptable, not expensive, but some of the solvents will be damage the NBR. Next, the Viton (FKM) will be very expensive than other rubber, especially strong resistance for Acid, Alkali, oil, and Gasoline chemicals.

Simply put, our chemical resistance sprayers are divided into two grades, one is NBR, and the performance and price are the best. The other kind of Viton is applicable to a wider range of chemicals if you have no cost considerations and also has a long service life.

Fine Black HDPE Plastic Trigger Spray Bottle 940ml

Fine Black HDPE Plastic Trigger Spray Bottle 940ml

Item No.: CFS096

Material: PP / HDPE (Plastic)
Trigger Sprayer Colors: Black
Function: Adjustable Nozzle
Bottle Color: Black
Capacity: 940 ml (25.36 oz)
Closure Size: 28/410 mm
Weight: 80 g

Description

Material: PP – Plastic Polypropylene is a tough plastic with good chemical resistance. PP is translucent naturally but can have a glossy finish when produced with color. It is not recommended for cold or sub-freezing temperatures.

High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylene thermoplastic made from petroleum. With a high strength-to-density ratio, HDPE is used in producing plastic bottles, corrosion-resistant piping, geomembranes, and plastic lumber.

Additional: These Spray Bottles are available in various sizes and specifications, please feel free to contact us, also OEM and ODM are welcome.

Translucent Black PET Spray Bottle 250ml with Black Trigger

Translucent Black PET Spray Bottle 250ml with Black Trigger

Item No.: CFS095

Material: PP / PET (Plastic)
Trigger Sprayer Colors: Black
Bottle Color: Translucent Black
Capacity: 250 ml.
Closure Size: 24/410 mm.
Weight: 42 g.
Height: 220 mm.
Diameter: 50 mm.
◉ M.O.Q: 3,000 Pieces.

Description

A plastic bottle is a bottle constructed from plastic. Plastic bottles are typically used to store liquids such as water, soft drinks, motor oil, cooking oil, medicine, shampoo, milk, and ink. These plastic specialty bottles are an ideal way to display any product and are available in a wide variety of shapes and sizes to suit any need. Our plastic bottles are made from HDPE, LDPE, PET or PVC.

Material: PET – Polyethylene terephthalate (sometimes written poly), commonly abbreviated PET, PETE, or the obsolete PETP or PET-P, is the most common thermoplastic polymer resin of the polyester family and is used in fibers for clothing, containers for liquids and foods, thermoforming for manufacturing, and in combination with glass fiber for engineering resins.

Additional: Due to differences in monitors, colors of products may also appear different from those shown on the site. These Spray Bottles are available in various sizes and specifications, OEM and ODM are welcome.

General White HDPE Plastic Bottle

SC900105-800X600
General White HDPE Plastic Bottle

Item No.: CFB011
Material: HDPE (Plastic)
Colors: White
Capacity: 500 ml

◉ M.O.Q: 3,000 Pieces.

Description

These plastic specialty bottles are an ideal way to display any product, and are available in a wide variety of shapes and sizes to suit any need.

Material: HDPE

High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylene thermoplastic made from petroleum. It is sometimes called “alkathene” or “polythene” when used for pipes. With a high strength-to-density ratio, HDPE is used in the production of plastic bottles, corrosion-resistant piping, geomembranes, and plastic lumber.

Additional

Due to differences in monitors, colors of products may also appear different to those shown on the site. These Spray Bottles are available in various sizes and specifications, OEM and ODM are welcome.

Red Nozzle Cap, White Trigger Sprayer

Red Nozzle Cap, White Trigger Sprayer
Red Nozzle Cap, White Trigger Sprayer

Item No.: CFT006
Material: PP (Plastic).
Colors: Red Nozzle Cap, White Body
Output per Stoke: 1.1cc ± 0.1cc.
Function: Spray, Steam, Off.
Closure Size: 28/400 mm.
Weight: 26 g.
Dip Tube Max Length: 290mm.
※ Chemical Resistant.
◉ M.O.Q: 3,000 Pieces.

Description
This chemically resistant trigger sprayer works well for most tough chemicals that would typically harm a standard trigger sprayer. The nozzle is adjustable to create a fine spray or jet stream for dispensing liquids. In addition to harsh chemicals, this trigger sprayer is good for general use, household cleaners, auto detail, carpet spot cleaning and more.

Material: Polypropylene
Plastic Polypropylene (PP) is a tough plastic that has a good chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. It is not recommended for cold or sub-freezing temperatures.

Additional:
Due to differences in monitors, colors of products may also appear different to those shown on the site. These Spray Bottles are available in various sizes and specifications, OEM and ODM are welcome.

Red Nozzle Cap, White Trigger Sprayer | Taiwan Supplier

Hot Products

2-MmnxftlPjEhC-1-1
Easy-fill sprayer w/ 300ml PVC bottle

Model/Item No.: EASY-300PVC
Country of Origin: Taiwan
Competitive Advantages: Great and high-quality control, New product, Customer’s design and logo are welcome, Competitive prices
Sales Method: Export, Manufacture
Payment Terms: T/T, L/C
Minimum Order Quantity: 1000 pcs
Product specifications:
1. Easy-fill sprayer head with PVC beautiful bottle suit for hair salon and garden tool. Easy to use!
2. The robust bronze atomizer delivers a fine micro mist every time.

 


2-tJxEAsHjVmVC-1-1
Sprayer head w/ copper nozzle

Model/Item No.: 255-HC
Country of Origin: Taiwan
Trade Information:
1. Packing: 200 pcs/carton
2. Delivery lead time: 30 days
Competitive Advantages: Great and high-quality control, Prompt delivery, Small order acceptable
Sales Method: Export, Manufacture
Payment Terms: L/C
Product specifications:
1. The adjustable nozzle is supplied with copper and in a closed position.
2. All components are made of corrosion-resistant
materials.
3. To spray the fine mist and strong jet.
4. Size: 28/410 mm
5. Material: PP, PE