Category: Spray Bottles

Item No.: CFS093

Material: PP / PET (Plastic)
Colors: Blue White / Clear
Capacity: 750 ml
Weight: 80 g
Height: 290 mm

◉ M.O.Q: 3,000 Pieces.

Description

These plastic specialty bottles are an ideal way to display any product, and are available in a wide variety of shapes and sizes to suit any need.

Material: Polypropylene
Plastic Polypropylene (PP) is a tough plastic that has a good chemical resistant. PP is translucent in its natural state but can have a glossy finish when produced with color. It is not recommended for cold or sub-freezing temperatures.

Material: PET
Polyethylene terephthalate (sometimes written poly(ethylene terephthalate)), commonly abbreviated PET, PETE, or the obsolete PETP or PET-P, is the most common thermoplastic polymer resin of the polyester family and is used in fibers for clothing, containers for liquids and foods, thermoforming for manufacturing, and in combination with glass fiber for engineering resins.

Due to differences in monitors, colors of products may also appear different to those shown on the site. These Spray Bottles are available in various sizes and specifications, OEM and ODM are welcome.

Item No.: CFS091

Material: PP / PET (Plastic)
Trigger Sprayer Colors: Black
Bottle Color: Black
Capacity: 500 ml (16.9 oz)
Weight: 135 g
Height: 255 mm (10-1/16 inch)
Diameter: 70 mm (2-3/4 inch)

◉ M.O.Q: 1,000 Pieces.

Description

It is a bottle designed to give you a continuous spray. Provides a non-pressurized airless spraying mist that is completely safe and free of propellants. The spraying is fast acting with very few prime squeezes needed. Where many spray bottles go wrong is with the sort of mist it the nozzle releases. Its either too strong or too weak and they usually clog and stop working efficiently after only a short while.

Pump the trigger three times quickly and hold to get the continuous spray for 3-4 seconds at a time. The more you pump, the longer the spray. Its simple cause and effect. The mist is so fine that even the droplets that land on your counters or floors dry up almost instantly. The continuous spray is an evenly distributed, spray pattern that for complete coverage (even upside down).

• Fine Mist
• Propellant-Free
• Continuous Spray
• Unique Design
• Non-Pressurized Container

Applications: Plant care, pet care, personal care, car care, and oils.

Item No.: CFS090

Material: PP / PVC (Plastic)
Colors: Black / Translucent Black
Capacity: 500 ml
Weight: 97 g
Height: 220 mm

◉ M.O.Q: 3,000 Pieces.

Description

These plastic specialty bottles are an ideal way to display any product, and are available in a wide variety of shapes and sizes to suit any need.

Material: Polypropylene
Plastic Polypropylene (PP) is a tough plastic that has a good chemical resistant. PP is translucent in its natural state but can have a glossy finish when produced with color. It is not recommended for cold or sub-freezing temperatures.

Material: PVC
Polyvinyl chloride also known as poly vinyl or viny, commonly abbreviated PVC, is the world’s third-most widely produced synthetic plastic polymer, after polyethylene and polypropylene. It is also used for bottles, other non-food packaging, and cards (such as bank or membership cards).

Due to differences in monitors, colors of products may also appear different to those shown on the site. These Spray Bottles are available in various sizes and specifications, OEM and ODM are welcome.

Item No.: CFS089

Material: PP / PET (Plastic)
Trigger Sprayer Colors: Gray
Bottle Color: Clear
Capacity: 500 ml
Screw Closure Size: 28/400 mm
Weight: 70 g
Height: 283 mm
Diameter: 62 mm

◉ M.O.Q: 3,000 Pieces.

Description

These plastic spray bottles are an ideal way to display any product, and are available in a wide variety of shapes and sizes to suit any need. The chemically resistant trigger sprayer works well for most tough chemicals that would typically harm a standard trigger sprayer. The nozzle is adjustable to create a fine spray or jet stream for dispensing liquids.

Material: Polypropylene
Plastic Polypropylene (PP) is a tough plastic that has a good chemical resistant. PP is translucent in its natural state but can have a glossy finish when produced with color. It is not recommended for cold or sub-freezing temperatures.

Material: PET
Polyethylene terephthalate (sometimes written poly(ethylene terephthalate)), commonly abbreviated PET, PETE, or the obsolete PETP or PET-P, is the most common thermoplastic polymer resin of the polyester family and is used in fibers for clothing, containers for liquids and foods, thermoforming for manufacturing, and in combination with glass fiber for engineering resins.

Additional

Due to differences in monitors, colors of products may also appear different to those shown on the site. These Spray Bottles are available in various sizes and specifications, OEM and ODM are welcome.

Item No.: CFS088
Material: HDPE (Plastic)
Capacity: 500ml
Colors: Gray, Red, White
Attractive design
Easy to use

◉ M.O.Q: 3,000 Pieces.

Description

Spray Bottle is designed for the extemporaneous preparation of atomized liquid.
Dispensing container is made of HDPE.
Includes empty bottle and atomizer tip with dip tube and screw cap.

Material: HDPE
High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylene thermoplastic made from petroleum. It is sometimes called “alkathene” or “polythene” when used for pipes. With a high strength-to-density ratio, HDPE is used in the production of plastic bottles, corrosion-resistant piping, geomembranes, and plastic lumber.

Additional 
Due to differences in monitors, colors of products may also appear different to those shown on the site. These Spray Bottles are available in various sizes and specifications, OEM and ODM are welcome.

Item No.: SBY909004

Material: PP / PET (Plastic)
Trigger Sprayer Colors: Blue, White
Bottle Color: White
Capacity: 500 ml (16.9 fl. oz)
Screw Closure Size: 28/400 mm
Weight: 65 g
Height: 245 mm (9-5/8″)

◉ M.O.Q: 3,000 Pieces.

Description

These plastic spray bottles are an ideal way to display any product, and are available in a wide variety of shapes and sizes to suit any need. The chemically resistant trigger sprayer works well for most tough chemicals that would typically harm a standard trigger sprayer. The nozzle is adjustable to create a fine spray or jet stream for dispensing liquids.

Material: Polypropylene
Plastic Polypropylene (PP) is a tough plastic that has a good chemical resistant. PP is translucent in its natural state but can have a glossy finish when produced with color. It is not recommended for cold or sub-freezing temperatures.

Material: PET
Polyethylene terephthalate (sometimes written poly(ethylene terephthalate)), commonly abbreviated PET, PETE, or the obsolete PETP or PET-P, is the most common thermoplastic polymer resin of the polyester family and is used in fibers for clothing, containers for liquids and foods, thermoforming for manufacturing, and in combination with glass fiber for engineering resins.

Additional

Due to differences in monitors, colors of products may also appear different to those shown on the site. These Spray Bottles are available in various sizes and specifications, OEM and ODM are welcome.

Item No.: CFS056

Material: PP / PVC (Plastic)
Trigger Sprayer Colors: Blue, White
Bottle Color: White
Capacity: 220 ml
Screw Closure Size: 28/400 mm
Weight: 52 g
Height: 160 mm

◉ M.O.Q: 3,000 Pieces.

Description

These plastic spray bottles are an ideal way to display any product, and are available in a wide variety of shapes and sizes to suit any need. The chemically resistant trigger sprayer works well for most tough chemicals that would typically harm a standard trigger sprayer. The nozzle is adjustable to create a fine spray or jet stream for dispensing liquids.

Material: Polypropylene
Plastic Polypropylene (PP) is a tough plastic that has a good chemical resistant. PP is translucent in its natural state but can have a glossy finish when produced with color. It is not recommended for cold or sub-freezing temperatures.

Material: PVC
Polyvinyl chloride, also known as poly vinyl or viny, commonly abbreviated PVC, is the world’s third-most widely produced synthetic plastic polymer, after polyethylene and polypropylene. It is also used for bottles, other non-food packaging, and cards (such as bank or membership cards).

Additional

Due to differences in monitors, colors of products may also appear different to those shown on the site. These Spray Bottles are available in various sizes and specifications, OEM and ODM are welcome.

Item No.: CFS055

Material: PP / PET (Plastic)
Trigger Sprayer Colors: Red White
Bottle Color: White
Capacity: 500 ml
Screw Closure Size: 28/400 mm
Weight: 69 g
Height: 230 mm

◉ M.O.Q: 3,000 Pieces.

Description

These plastic spray bottles are an ideal way to display any product, and are available in a wide variety of shapes and sizes to suit any need. The chemically resistant trigger sprayer works well for most tough chemicals that would typically harm a standard trigger sprayer. The nozzle is adjustable to create a fine spray or jet stream for dispensing liquids.

Material: Polypropylene
Plastic Polypropylene (PP) is a tough plastic that has a good chemical resistant. PP is translucent in its natural state but can have a glossy finish when produced with color. It is not recommended for cold or sub-freezing temperatures.

Material: PET
Polyethylene terephthalate (sometimes written poly(ethylene terephthalate)), commonly abbreviated PET, PETE, or the obsolete PETP or PET-P, is the most common thermoplastic polymer resin of the polyester family and is used in fibers for clothing, containers for liquids and foods, thermoforming for manufacturing, and in combination with glass fiber for engineering resins.

Additional

Due to differences in monitors, colors of products may also appear different to those shown on the site.
These Spray Bottles are available in various sizes and specifications, OEM and ODM are welcome.

Item No.: CFS053

Material: PP / PET (Plastic)
Colors: White / White
Capacity: 200 ml
Closure Size: 24/410 mm
Weight: 39 g
Height: 205 mm

◉ M.O.Q: 3,000 Pieces.

Description

These plastic specialty bottles are an ideal way to display any product, and are available in a wide variety of shapes and sizes to suit any need.

Material: Polypropylene
Plastic Polypropylene (PP) is a tough plastic that has a good chemical resistant. PP is translucent in its natural state but can have a glossy finish when produced with color. It is not recommended for cold or sub-freezing temperatures.

Material: PET
Polyethylene terephthalate (sometimes written poly(ethylene terephthalate)), commonly abbreviated PET, PETE, or the obsolete PETP or PET-P, is the most common thermoplastic polymer resin of the polyester family and is used in fibers for clothing, containers for liquids and foods, thermoforming for manufacturing, and in combination with glass fiber for engineering resins.

Due to differences in monitors, colors of products may also appear different to those shown on the site. These Spray Bottles are available in various sizes and specifications, OEM and ODM are welcome.

Item No.: CFS052

Material: PP / PP (Plastic)
Trigger Sprayer Colors: Green, White
Bottle Color: Translucent Green
Capacity: 360 ml
Screw Closure Size: 28/400 mm
Weight: 70 g
Height: 200 mm

◉ M.O.Q: 3,000 Pieces.

Description

These plastic spray bottles are an ideal way to display any product, and are available in a wide variety of shapes and sizes to suit any need. The chemically resistant trigger sprayer works well for most tough chemicals that would typically harm a standard trigger sprayer. The nozzle is adjustable to create a fine spray or jet stream for dispensing liquids.

Material: Polypropylene
Plastic Polypropylene (PP) is a tough plastic that has a good chemical resistant. PP is translucent in its natural state but can have a glossy finish when produced with color. It is not recommended for cold or sub-freezing temperatures.

Additional

Due to differences in monitors, colors of products may also appear different to those shown on the site. These Spray Bottles are available in various sizes and specifications, OEM and ODM are welcome.

Item No.: CFS051

Material: PP / HDPE (Plastic)
Trigger Sprayer Colors: Blue, White
Bottle Color: Translucent White
Capacity: 280 ml
Screw Closure Size: 28/400 mm
Weight: 55 g
Height: 195 mm
Diameter: 82 mm

◉ M.O.Q: 3,000 Pieces.

Description

These plastic Spray bottles are an ideal way to display any product, and are available in a wide variety of shapes and sizes to suit any need. The chemically resistant trigger sprayer works well for most tough chemicals that would typically harm a standard trigger sprayer. The nozzle is adjustable to create a fine spray or jet stream for dispensing liquids.

Material: Polypropylene
Plastic Polypropylene (PP) is a tough plastic that has a good chemical resistant. PP is translucent in its natural state but can have a glossy finish when produced with color. It is not recommended for cold or sub-freezing temperatures.

Material: HDPE
High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylene thermoplastic made from petroleum. It is sometimes called “alkathene” or “polythene” when used for pipes. With a high strength-to-density ratio, HDPE is used in the production of plastic bottles, corrosion-resistant piping, geomembranes, and plastic lumber.

Additional

Due to differences in monitors, colors of products may also appear different to those shown on the site.
These Spray Bottles are available in various sizes and specifications, OEM and ODM are welcome.